Close
Filters

Southcott

View as Grid List
Sort by
Display per page

2 - Port Line Mount Bodies

2 - Port line mount bodies to suit cavities SAE-08 to SAE-16 Material: Aluminuim rated to 210 bar (3000 PSI) Steel Bodies rated to 345 bar (5000 PSI) Ports: 9/16" UNO to 1-5/16" UNO 3/8"BSPP to 1"BSPP
$0.00 inc GST

2.5 - Port Line Mount Bodies

2.5 - Port line mount bodies to suit cavities SAE-08 to SAE-12 Material: Aluminuim rated to 210 bar (3000 PSI) Steel Bodies rated to 345 bar (5000 PSI) Ports: 9/16" UNO to 1-1/16" UNO 3/8" BSPP to 3/4" BSPP
$0.00 inc GST

3 - Port Line Mount Bodies

3 - Port line mount bodies to suit cavities SAE-08 to SAE-16 Material: Aluminuim rated to 210 bar (3000 PSI) Steel Bodies rated to 345 bar (5000 PSI) Ports: 9/16" UNO to 1-5/6" UNO 3/8"BSPP to 3/4" BSPP
$0.00 inc GST

3 - Port Line Mount Bodies

3 - Port line mount bodies to suit cavities SAE-08 to SAE-16 Material: Aluminuim rated to 210 bar (3000 PSI) Steel Bodies rated to 345 bar (5000 PSI) Ports: 9/16" UNO to 1-5/6" UNO 3/8"BSPP to 3/4" BSPP
$0.00 inc GST

BD - Needle Valve

BD Series bi-directional non compensated needle valve. Optional panel mount kit available. Ports: 1/4" BSPP to 2" BSPP
$0.00 inc GST

Close Mount Cylinder Load Hold Valve Bodies

Close Mount Cylinder Load Hold Valve Bodies. These bodies are suitable as a single or double counter-balance valves (CBPA) or as a piolt operated check valves (POCI) directly attached to a cylinder port. Used special Child port adaptor ZC52-0909, ZC52-1212, ZC52-1412 or ZC52-1717 to attach direct to the cylinder port. Material: Aluminuim rated to 210 bar (3000 PSI) Steel Bodies rated to 345 bar (5000 PSI) Ports: 9/16" UNO to 1-1/16" UNO
$0.00 inc GST

EF1 - Southcott Wire Braid Medium Pressure

EF1 1-Wire Braid AG Hose SAE 100R2 AT (Non-MSHA Rated Hose) Recommended For: Medium-pressure hydraulic lines Standards: SAE 100R2 Type AT and EN853 specifications. Tube: Black, oil resistant, synthetic rubber (Nitrile). See Characteristics Of Hose Stock Types. Reinforcement: One braid of high-tensile steel wire. Cover: Black, abrasion-resistant synthetic rubber (Modified CR). Temperature Range: -40°F to +212°F (-40°C to +100°C). For water emulsions: Max 200°F (93°C) pressure lines, Max 180°F (82°C) return lines
$0.00 inc GST

EF2 - Southcott Wire Braid High Pressure

Gates EF2 Wire Braid Hose. Meets flame resistance acceptance designation MSHA 2G Recommended For: High-pressure hydraulic lines Standards: SAE 100R2 AT (Non- MSHA Rated Hose). Tube: Black, oil resistant, synthetic rubber Reinforcement: Two braids of high-tensile steel wire. Temperature Range: -40°C to +100°C.
$0.00 inc GST

EM - Pressure Gauge Isolator

Isolator Pressure Gauge
$0.00 inc GST

EziSleeve - Southcott Abrasion Protection Sleeve

EziSleeve is a multi-filament nylon textile sleeve (MSHA approved) designed to provide an additional protective layer over the hydraulic hose. The tight woven construction provides excellent abrasion resistance and may assist in prolonging the life of your hydraulic assemblies. Colour: Black Industries: Mobile, Industrial, Mining, Agriculture
$0.00 inc GST

FM - Southcott Open Loop Motor

FM Series units are designed for use as bi-rotational closed circuit transmission motors or as unidirectional open circuit pumps or motors.
$0.00 inc GST

Hydraulic Oil Tanks (10L to 100L)

Suitable for vertical mounting of pump & electric motor. Contruction: Steel (welded inside & outside) Unpainted Tanks: Finished in black steel only Painted Tanks: Finished with power coating inside andout Lids: Supplied seperate, blank and upainted 10 & 25 L tans are in Aluminium with steel lid
$0.00 inc GST