Gates

Recommended For: Petroleum and water-based hydraulic fluids in suction lines or in low pressure return lines. Standards: Meets or exceeds the requirements of SAE 100R4. Meets marine ABS with use of HeatGuard high temp sleeve. Meets Flame resistance acceptance designation MSHA 2G. Tube: Black synthetic rubber specifically designed for resistance to high temperatures Temperature Range: -40°F to 212°F (-55°C to -100°C) continuous service for petroleum and synthetic oils. Maxinmum of +158°F (+70°C) for water, water/oil emulsions and water glycol.

Recommended For: Low-pressure hydraulics oil return lines for general purpose water, glycol antifreeze solutions, conveying diesel fuel, gasoline or air. Meets SAE 30R2 performance requirements for both Type 1 and Type 2. Tube: Black, synthetic rubber, oil resistant (Nitrile - Type C). Reinforcement: One fibre braid (-3 to -10). Spiral braid (-12 to -16). Cover: Black synthetic rubber. Oil and abrasion resistant. (Modified Nitrile - Type C). Temperature Range: -40°F to +212°F (-40°C to +100°C). Air to +160°F (+71°C) only. Couplings: Super-Crimp and Gates Mega-Crimp series.

Recommended For: Petroleum-base hydraulic oils, water, glycol antifreeze solutions, engine lubricating oils, and air. Lock-On hose and couplings are NOT recommended for pressure surge applications or critical applications such as permanent piping in residential or commercial buildings. Do not use for gasoline of diesel fuels, unless approved by Gates H/C Product Application. Meets flame resistance acceptance designation MSHA 2G Tube: Black, oil-resistant synthetic rubber (Modified Nitrile - Type C). Available in black-Neoprene (LOLA), blue (LOLB)< green (LOLG), red (LOLR), yellow (LOLY) and grey (LOLC) colours. Temperature Range: -40°F to +212°F (-40°C to +100°C). For air: 160°F (+71°C) only. Couplings: Field-Fit Lock-On series.

Recommended For: Petroleum-base hydraulic oils, glycol anti-freeze compounds, water, hot lubricating oils and air. Lock-On hose and couplings are NOT recommended for vibration or pressure surge applications such as permanent piping in residential or commercial buildings. Tube: Black, oil-resistant synthetic rubber (Nitrile - Type C). Reinforcement: One fibre braid. Cover: Oil and mildew resistant textile braid, impregnated with synthetic rubber. Temperature Range: -40°F to +212°F (-40°C to +100°C). For air: -40°F to +160°F (-40°C to +71°C). Couplings: Field-Fit Lock-On series.

Recommended For: Liquid and gaseous R134a and R12 refrigerants in automotive air conditioning and industrial systems; i.e., tractors construction trucks, mobile and stationary refrigeration units. Designed to minimize permeation of R134a refrigerant. Tube: Black synthetic rubber (Chloroprene - Type A). Barrier: Nylon liner. Reinforcement: Two layers of spiral polyester. Cover: Black synthetic rubber (EPDM). Temperature Range: -22°F to +257°F (-30°C to +125°C). Couplings: Gates PolarSeal series.

Recommended For: For use with hot or cold water, high pressure cleaning equipment. NOTE: Not recommended for steam service. Tube: Synthetic rubber specifically compounded to handle high pressure water service. Reinforcement: High tensile steel 1 & 2 wire braid. Cover: Specifically compounded to handle high pressure washer environment. Temperature Range: -40°F to +250°F (-40°C to +121°C) . Increased operating temperature will reduce hose assembly service life. Couplings: Super-Crimp and Gates Mega-Crimp series.

Recommended For: On-shore /off-shore and marine Diesel fuel and gasoline applications and hot oil lines up to 202°F. Meets marine fuel specifications SAE J1527 Type A Class 1 and SAE J1942 APPLICATIONS. Exceeds performance requirements of SAE J30RZ for non-marine applications. Tube: Nitrile - Type C. Reinforcement: One wire braid. Cover: Modified Nitrile - Type C Blue. Temperature Range: -4°F to +212°F (-20°C to +100°C). Couplings: Field-Fit C5 series.

Recommended For: Petroleum-base or phosphate ester fluids; diesel fuels and filtration lines, transmission coolant lines, hot lube oil lines, power steering (CAUTION: Intended for heavy-duty commercial vehicle use only), gasoline and turbocharger oil supplies. Tilt cab cylinder and air brakes. C5D (-4 to -12) meets or exceeds DOT FMVSS 106-74 Type All, SAE J1402 Type ALL and SAE J1019 and fuel resistance of SAE J30R2. Tube: Black, oil and heat resistant, synthetic rubber (CPE - Type J). Reinforcement: One braid of high tensile steel wire over one braid of polyester. Cover: Green for easy identification, oil and mildew resistant, polyester braid impregnated with synthetic rubber. Temperature Range: -40°F to +300°F (-40°C to +149°C). Air to +250°F (+121°C) only, maximum phosphate esters to +212°F(+100°C) only. Couplings: Field-Fit C5 series.

Recommended For: Multi-purpose hose for use on fuel lines, PVC and EEC systems, and for fuel return hose connections on diesel fuel injection systems. Approved for use with leaded and unleaded gasoline, diesel and gasoline blends of ethanol, methanol and ethers (up to the legal limit allowed by EPA). Tube: Nitrile Rubber* Reinforcement: Reinforcement: Reinforced construction. Cover: Oil resistant cover resists the effects of high heat and ozone found in engine compartments. Warning: Do not use for pressure lines on fuel injected engines or for cooling systems applications. (Use MPI Hose).

Recommended For: Fuel line applications to provide flexible connections between rigid fuel distribution lines and the engine. Also for use in evaporative emission control systems and as a vent line. NOTE: Not recommended for fuel injection systems. Tube: Nitrile - Type C.* Reinforcement: Single ply of synthetic fibre. Cover: Type C₂(NBR/PVC). Black, Fuel, oil , ozone and high temperature resistant. Temperature Range: -40°F to +257°F (-40°C to +125°C).

Recommended for: Power steering pressure lines. Designed to meet requirements of SAE J2050 specifications. Tube: Synthetic rubber specially compounded to provide resistance to high temperatures and power steering fluid (Hypalon - Type M). Reinforcement: Two high-strength nylon braids that resist high temperatures and allow for expansion for system noise dampening. Cover: Black, synthetic rubber developed specifically to resist under hood environment (Hypalon). Temperature Range: -40°F to +300°F (-40°C to +150°C). Couplings: Super-Crimp.

Recommended For : Ideal for windshield washers and vacuum-operated accessories. Tube: Type P (EPDM). Black. Heat resistant. Reinforcement: Non-reinforced. Cover: Uncovered. Temperature Range: -40°F to +257°F (-40°C to +125°C). Meets: SAE J1037, J942b.

Recommended For: Applications requiring a premium-grade hose with excellent flexibility and maximum resistance to air, water, petroleum oils, gasoline, kerosene and fuel oil (to 120°F/49°C) and lubricating oils (to 212°F/100°C). Excellent weather and ozone resistance. It is non-conductive to 1000 volts DC. Tube: Black. (Nitrile - Type C). Reinforcement: synthetic, high tensile textile cord. Cover: Red (Modified Nitrile - Type C2). Temperature Range: -40°F to +212°F (-40°C to +100°C).

Recommended For: Applications requiring a tough hose with a rugged cover for outstanding abrasion resistance and extended service life where constant flexing and bending is required. This top-of-the-line premium oil resistant hose is designed for applications involving air, oil, and water as well as grease sprays, paraffin waxes, salt solutions and a variety of chemicals. It offers excellent durability for extra long life in mining, air drill, construction, poultry plants, abattoirs, quarries, shipyards, food processing, railroads and other severe service environments. It is non-conductive at 1000 volts DC. Tube: Black. (Nitrile - Type C). Reinforcement: Synthetic, high tensile textile cord. Cover: Yellow (Carboxylate Nitrile - Type C4). Temperature Range: -40°F to +212°F (-40°C to +100°C).

HeatGuard is a completely non-asbestos, heat resistant, protective sleeving. Its special silicone coating can also withstand a broad range of solvents and fuels. It goes on easily over most hoses and couplings, with only hose clamps or wire ties required for fastening. Best of all, HeatGuard can pay for itself in reduced replacement and maintenance costs. HeatGuard is knitted, coated fibreglass; meets SAE AS1072A specification. Temperature range: -54°C to +260°C for continuous exposure.

Temperature Range: -40°C to +121°C. Economical, lightweight plastic sleeving protects hose from water, air, gasoline, oil and hydraulic fluids. Can be used to bundle several hoses together.

Gates Nylon Sleeves perform a dual role: They provide excellent abrasive resistance to protect individual hoses. They can be used to bundle several hose assemblies together for maximum protection. Downtime and maintenance costs are reduced. Nylon Sleeves are unique because they form an extra protective layer against abrasive forces. Construction: Thousands of tiny Nylon filaments, woven into the texturized yarn, "friz" providing a self-renewing shield that is extremely resistant to severe abrasion. Note: Do not use Nylon Sleeve where ambient temperature exceeds 120°C.

The LifeGuard line-of-sight sleeving system is an effective, economical alternative to costly metal shielding or re-routing of hose lines, and does not affect system performance. With an inner layer of tightly woven filament nylon and an outer layer of textured nylon that also resists abrasion, it meets ISO3457 and MSHA flame-resistance requirements.

Clamp Collar to for LifeGuard - Aluminium

Clamp Collar to for LifeGuard - Stainless Steel

Flexible Hose Bend Restrictors protect the hose near the coupling. Gates tapered PVC sleeves reduce bending stresses in the hose near the coupling to prevent damage, such as in power wash applications. Installed during the assembly, this smoothly-finished product withstands temperatures from -40°C to +93°C and is available in nine sizes. Features: Benefits: Tapered Design: Reduces bending stress near the hose-coupling junction, so extra long, more trouble free hose life can be expected. Attractive appearance enhances look of quality. Wide Temperature Range: Helps give extra long service life for both hot and cold power wash assemblies. Friction Fit: No adhesive or clamps required to hold bend restrictor in place on hose assembly. Saves assembly cost.

Global Series 110° SAE O-Ring Flange Code 61

Global Series 22.5° Tube Caterpillar O-Ring Flange

Global Series 22.5° SAE O-Ring Flange Code 61

Global Series 22.5° Tube SAE O-Ring Flange Code 62

Global Series 30° Tube SAE O-Ring Flange Code 62

Global Series 30° Tube Caterpillar O-Ring Flange

Global Series 30° SAE O-Ring Flange Code 61

Global Series 45° Tube Caterpillar O-Ring Flange

Global Series 45° Tube Female BSPP O-Ring Swivel

Global Series 45° Tube Female DIN Heavy O-Ring Swivel

Global Series 45° Tube Female JIC Swivel

Global Series 45° Tube Female ORFS Swivel

Global Series 45° SAE O-Ring Flange Code 61

Global Series 45° Tube SAE O-Ring Flange Code 62

Global Series 60° Tube Caterpillar O-Ring Flange