The diaphragm accumulator consists of a fluid section and a gas section with the diaphragm acting as a gas-proof screen. The fluid section is connected with the hydraulic circuit so that the diaphragm accumulator takes in fluid when pressure increases and the gas is compressed. When the pressure drops, the compressed gas expands and forces the stored fluid into the circuit.
The diaphragm accumulator is regarded as a non-repairable unit.
Construction: Welded seam
Diaphragm: Alternatives available on request
Installation: Mount in any position
Working Temperature: -10°C to 80°C
Maximum Allowable Pressure Ratio: <6:1
Charging Kit: Available
SDNR Series line mount check valve, available in 5 PSI or 65 PSI cracking pressure.
This can also configure in other cracking pressure to meet system requirements.
Ports:
1/4" BSPP to 2" BSPP
Material:
Steel body
Pressure compensated
Designed to supply two circuits with a single pump.
Maximum pressure - 210 BAR (3000 PSI)
Lever is adjustable through 90˚
Port "IN" = Pressure port
Port "CF" = Controlled flow
Port "EX" = Excess flow (can be used to power a second circuit)