Flow Control Valves

This unit is a screw in, catridge type, non-compensated, adjustable, bi-directional needle flow control valve. Operations: This valve increases its orifice value from fully closed to fully open in 4-1/2 turns with counterclockwise rotation. Positive shut-off. Specifications: Operating Pressure: 5,000 PSI (350 Bar) Flow : 38 LPM to 136 LPM Valve Housings: 2,500 PSI (210 Bar) = Aluminum 5,000 PSI (350 Bar) = Steel

This unit is a screw in, catridge type, adjustable, poppet type, hydraulic flow control valve with or without reverse free flow. Operations: This valve increases its orifice value from fully closed to fully open with counter-clockwise rotation. F version - Free flow check N version - Needle valve Specifications: Operating Pressure: 5,000 PSI (350 Bar) Flow:38 LPM to 190 LPM Valve Housings: 2,500 PSI (210 Bar) = Aluminum 5,000 PSI (350 Bar) = Steel

Fixed Type - This unit is a screw in, catridge type, pressure compensated, fixed orifice, restrictive hydraulic flow control valve. Flow range: 0.8 LPM to 15.1 LPM Adjustable Type - This unit is a screw in, catridge type, pressure compensated, fixed orifice, 50% flow adjustment, restrictive hydraulic flow control valve. Flow range: 0.8 LPM to 22.7 LPM (Flow adjustment under pressure is difficult) Operations: Valve maintains constant flow from port 1 to 2 regardless of system pressure or load and non-compensated flow from port 2 to 1 and goes thru the control orifice. Specifications: Operating Pressure: 5,000 PSI (350 Bar) Valve Housings: 2,500 PSI (210 Bar) = Aluminum 5,000 PSI (350 Bar) = Steel

Fixed Type - This unit is a screw in, catridge type, pressure compensated, fixed orifice, priority type hydraulic flow control valve. Flow range: 0.8 LPM to 15.1 LPM Adjustable Type - This unit is a screw in, catridge type, pressure compensated, fixed orifice, 50% flow adjustment, priority type hydraulic flow control valve. Flow range: 0.8 LPM to 22.7 LPM (Flow adjustment under pressure is difficult) Operations: Valve maintains constant flow from port 1 to 3 regardless of system pressure or load and excess flow is diverted to port 2. Flow from port 3 goes thru the control orifice to port 1 at non-compensated non-compensated flow. Specifications: Operating Pressure: 5,000 PSI (350 Bar) Valve Housings: 2,500 PSI (210 Bar) = Aluminum 5,000 PSI (350 Bar) = Steel

This unit is a spool type, screw in cartridge style, flow divider / combiner valve. Operations: This valve divides flow from port 3 to port 2 and 4 and combines flow from port 2 and 4 to port 3 at the specified flow division regardless of load or system pressure. Should the circuit operation result in blockage of either port 2 or 4, the opposite port will continue to flow but at reduced flow rate to synchronize a cylinder. Specifications: Operating Pressure: 5,000 PSI (350 Bar) Flow: 30 LPM to 121 LPM Valve Housings: 2,500 PSI (210 Bar) = Aluminum 5,000 PSI (350 Bar) = Steel